| PHYSICAL PROPERTIES | TEST METHOD | UNIT | MINIMUM AVERAGE ROLL VALUE |
| Mass per Unit Area(Typical) | ASTM D-5261 | oz/yd2(g/m2) | 10.3(350) |
| Aperture Size (Grid) (MD/TD)(Typical) | Measured | in(mm) | 1.2/1.2(30/30) |
| Percent Open Aera (Grid only) | COE Method | % | 70+ |
| Wide Width Tensile Strength1 @ Ultimate (MD/TD) | ASTM D-6637 | lb/ft (kN/m) | 3426/3426 (50/50) |
| Elongation at Break (Typical) | ASTM D-6637 | % | <3 |
| Melting Point | ASTM D-276 | ºF (ºC) | >425(>218) |
| Roll Dimensions (Max.Width×Length) | - | ft(m) | 7.22×328.1(2.20×100) |
| 12.5×246(3.81×75) | |||
| Roll Area | - | yd2 (m2) | 236.1 (220) |
| 341.67 (285.75( | |||
| Roll Weight (Gross) | - | lb (kg) | 190 (86) |
| 247 (112) |
NOTES: 1: ALL values stated here are Minmum Average Roll Values and based on a 95% confidence level unless otherwise \
noted.(MD-Machine Direction; TD-Transverse Direction, also called Cross Machine Direction
