Product Description
FSK-7150A is a commercial grade Foil-Scrim-Kraft Facing with 3-way scrim and 50gsm Kraft, most commonly used as a facing for duct wrap insulation, also suitable for other insulation applications where a general use vapor retarder is needed. It is also a good choice for radiant barrier applications because of its low emissivity.
Construction
Typical Physical Property
Available Roll Width: 1.0m, 1.2m, 1.25m, 1.30m
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: ±0.5%.
3. The products should be stored at room temperature, kept from wet and kept away heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
JIANGYIN MEIYUAN INDUSTRIES CORPORATION
Add: 11 Songwentou Road, Yunting Street, Jiangyin City, Jiangsu Pr., China 214400
Tel: 86-510-86877606 - 7307 Fax: 86-510-86891721
Website: meiyuan1988.en.made-in-china.com
FSK-7150A is a commercial grade Foil-Scrim-Kraft Facing with 3-way scrim and 50gsm Kraft, most commonly used as a facing for duct wrap insulation, also suitable for other insulation applications where a general use vapor retarder is needed. It is also a good choice for radiant barrier applications because of its low emissivity.
Construction
| Facing Composition | Description | Value (English) | Value (Metric) |
| Foil | Aluminum | 0.28 mil | 7 micron |
| Reinforcing - MD | Fiberglass | 2 / inch | 8 / 100mm |
| Reinforcing - XD | Fiberglass | 3 / inch | 12 / 100mm |
| Adhesive | Water based | ------ | ------ |
| Kraft | Natural | 30 lbs / 3000 ft2 | 50gsm |
| Physical Property | Test Method | Value (English) | Value (Metric) |
| Basis Weight | Scale | 15.4 lbs / 1000 ft2 | 75 gsm |
| Permeance (WVTR) | ASTM E96, Procedure A | 0.1 perm | 5.75 ng/N.s |
| Tensile Strength - MD | ASTM D828 | 22.7 lbs/In | 100 N/25mm |
| Tensile Strength - XD | ASTM D828 | 10.5 lbs/In | 45 N/25mm |
| Burst Strength | ASTM D774 | 43.5 psi | 30 N/cm2 |
| Low Temperature Resistance | ASTM D1790 4 hrs @-40 °F (- 40 °C) | Remains Flexible No Delamination | Remains Flexible No Delamination |
| High Temperature Resistance | ASTM D1790 4 hrs @ +240 °F (+116 °C) | Remains Flexible No Delamination | Remains Flexible No Delamination |
| Dimensional Stability | ASTM D1204 @ 150F (65C) | Less than 0.5% | Less than 0.5% |
| Emissivity | ASTM E408 | 0.03 | 0.03 |
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: ±0.5%.
3. The products should be stored at room temperature, kept from wet and kept away heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
JIANGYIN MEIYUAN INDUSTRIES CORPORATION
Add: 11 Songwentou Road, Yunting Street, Jiangyin City, Jiangsu Pr., China 214400
Tel: 86-510-86877606 - 7307 Fax: 86-510-86891721
Website: meiyuan1988.en.made-in-china.com