Product Description
DFC-1001A is a light duty, commercial grade D/S Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer natural kraft paper. These layers are bonded together with polyethylene and reinforced with 3-way fiberglass scrim. It is ideally used as sarking and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building. Combining with glasswool or foam insulation, it is excellent as a vapor barrier for air-conditioning ducts, pipes and vessels.
Construction
Typical Physical Property
Available Roll Width: 1.25m
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: ±0.5%.
3. The products should be stored at room temperature, kept from wet and kept away heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
JIANGYIN MEIYUAN INDUSTRIES CORPORATION
Add: 11 Songwentou Road, Yunting Street, Jiangyin City, Jiangsu Pr., China 214400
Tel: 86-510-86877606 - 7307 Fax: 86-510-86891721
Website: meiyuan1988.en.made-in-china.com
DFC-1001A is a light duty, commercial grade D/S Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer natural kraft paper. These layers are bonded together with polyethylene and reinforced with 3-way fiberglass scrim. It is ideally used as sarking and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building. Combining with glasswool or foam insulation, it is excellent as a vapor barrier for air-conditioning ducts, pipes and vessels.
Construction
| Composition | Description | Value (English) | Value (Metric) |
| Foil | Aluminum | 0.28 mil | 7 micron |
| Reinforcing - MD | Fiberglass | 2 / inch | 8 / 100mm |
| Reinforcing - XD | Fiberglass | 3 / inch | 12 / 100mm |
| Adhesive | Polyethylene | ------ | ------ |
| Kraft | Natural | 49 lbs / 3000 ft2 | 80gsm |
| Adhesive | Polyethylene | ------ | ------ |
| Foil | Aluminum | 0.28 mil | 7 micron |
| Physical Property | Test Method | Value (English) | Value (Metric) |
| Basis Weight | Scale | 27.6 lbs / 1000 ft2 | 135 gsm |
| Permeance (WVTR) | ASTM E96, Procedure A | 0.02 perm | 1.15 ng/N.s |
| Tensile Strength - MD | ASTM D828 | 45 lbs/In | 200 N/25mm |
| Tensile Strength - XD | ASTM D828 | 25 lbs/In | 110 N/25mm |
| Burst Strength | ASTM D774 | 64 psi | 45 N/cm2 |
| Low Temperature Resistance | ASTM D1790 4 hrs @-40 °F (- 40 °C) | Remains Flexible No Delamination | Remains Flexible No Delamination |
| High Temperature Resistance | ASTM D1790 4 hrs @ +150 °F (+66 °C) | Remains Flexible No Delamination | Remains Flexible No Delamination |
| Emissivity | ASTM E408 | 0.03 | 0.03 |
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: ±0.5%.
3. The products should be stored at room temperature, kept from wet and kept away heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
JIANGYIN MEIYUAN INDUSTRIES CORPORATION
Add: 11 Songwentou Road, Yunting Street, Jiangyin City, Jiangsu Pr., China 214400
Tel: 86-510-86877606 - 7307 Fax: 86-510-86891721
Website: meiyuan1988.en.made-in-china.com